In this section, you will explore the following questions:
- What are the steps in eukaryotic transcription?
- What are the structural and functional similarities and differences among the three RNA polymerases?
Connection for AP® Courses
Connection for AP® Courses
Scientists discovered a strand of mRNA translated into a sequence of amino acids (polypeptide) shorter than the mRNA molecule transcribed from DNA. Before the information in eukaryotic mRNA is translated into a protein, it is modified or edited in several ways. A 5′-methylguanosine (or GTP) cap and a 3′ poly-A tail are added to protect mature mRNA from degradation and allow its export from the nucleus. Pre-mRNAs also undergo splicing, in which introns are removed and exons are reconnected. Exons can be reconnected in different sequences, a phenomenon referred to as alternative gene splicing, which allows a single eukaryotic gene to code for different proteins. We will explore the significance of alternative gene splicing in more detail in other chapters.
Information presented and the examples highlighted in the section support concepts outlined in Big Idea 3 of the AP® Biology Curriculum Framework. The Learning Objectives listed in the Curriculum Framework provide a transparent foundation for the AP® Biology course, an inquiry-based laboratory experience, instructional activities, and AP® Exam questions. A Learning Objective merges required content with one or more of the seven Science Practices.
|Big Idea 3
|Living systems store, retrieve, transmit, and respond to information essential to life processes.
|Enduring Understanding 3.A
|Heritable information provides for continuity of life.
|3.A.1 DNA, and in some cases RNA, is the primary source of heritable information.
|6.5 The student can evaluate alternative scientific explanations.
|3.1 The student is able to construct scientific explanations that use the structures and mechanisms of DNA and RNA to support the claim that DNA and, in some cases RNA, are the primary source of heritable information.
After transcription, eukaryotic pre-mRNAs must undergo several processing steps before they can be translated. Eukaryotic (and prokaryotic) tRNAs and rRNAs also undergo processing before they can function as components in the protein synthesis machinery.
The eukaryotic pre-mRNA undergoes extensive processing before it is ready to be translated. The additional steps involved in eukaryotic mRNA maturation create a molecule with a much longer half-life than a prokaryotic mRNA. Eukaryotic mRNAs last for several hours, whereas the typical E. coli mRNA lasts no more than five seconds.
Pre-mRNAs are first coated in RNA-stabilizing proteins; these protect the pre-mRNA from degradation while it is processed and exported out of the nucleus. The two most important steps of pre-mRNA processing are the addition of stabilizing and signaling factors at the 5′ and 3′ ends of the molecule, and the removal of intervening sequences that do not specify the appropriate amino acids. In rare cases, the mRNA transcript can be edited after it is transcribed.
RNA Editing in Trypanosomes
The trypanosomes are a group of protozoa that include the pathogen Trypanosoma brucei, which causes sleeping sickness in humans (Figure 15.13). Trypanosomes, and virtually all other eukaryotes, have organelles called mitochondria that supply the cell with chemical energy. Mitochondria are organelles that express their own DNA and are believed to be the remnants of a symbiotic relationship between a eukaryote and an engulfed prokaryote. The mitochondrial DNA of trypanosomes exhibit an interesting exception to the central dogma: their pre-mRNAs do not have the correct information to specify a functional protein. Usually, this is because the mRNA is missing several U nucleotides. The cell performs an additional RNA processing step called RNA editing to remedy this.
Other genes in the mitochondrial genome encode 40- to 80-nucleotide guide RNAs. One or more of these molecules interact by complementary base pairing with some of the nucleotides in the pre-mRNA transcript. However, the guide RNA has more A nucleotides than the pre-mRNA has U nucleotides to bind with. In these regions, the guide RNA loops out. The 3′ ends of guide RNAs have a long poly-U tail, and these U bases are inserted in regions of the pre-mRNA transcript at which the guide RNAs are looped. This process is entirely mediated by RNA molecules; that is, guide RNAs—rather than proteins—serve as the catalysts in RNA editing.
RNA editing is not just a phenomenon of trypanosomes. In the mitochondria of some plants, almost all pre-mRNAs are edited. RNA editing has also been identified in mammals such as rats, rabbits, and even humans. What could be the evolutionary reason for this additional step in pre-mRNA processing? One possibility is that the mitochondria, being remnants of ancient prokaryotes, have an equally ancient RNA-based method for regulating gene expression. In support of this hypothesis, edits made to pre-mRNAs differ, depending on cellular conditions. Although speculative, the process of RNA editing may be a holdover from a primordial time when RNA molecules, instead of proteins, were responsible for catalyzing reactions.
In eukaryotes, pre-mRNAs are processed to form mature mRNAs. How does the mRNA editing that occurs in Trypanosoma brucei differ from mRNA processing that occurs in all eukaryotes?
- mRNA editing changes the coding sequence of the mRNA, but mRNA processing does not.
- mRNA editing splices out noncoding RNA, but mRNA processing does not.
- mRNA editing adds a cap of 5′-methylguanosine to the mRNA, but mRNA processing does not.
- mRNA editing adds a 3′ poly-A tail, but mRNA processing does not.
While the pre-mRNA is still being synthesized, a 7-methylguanosine cap is added to the 5′ end of the growing transcript by a phosphate linkage. This moiety (functional group) protects the nascent mRNA from degradation. In addition, factors involved in protein synthesis recognize the cap to help initiate translation by ribosomes.
3′ Poly-A Tail
Once elongation is complete, the pre-mRNA is cleaved by an endonuclease between an AAUAAA consensus sequence and a GU-rich sequence, leaving the AAUAAA sequence on the pre-mRNA. An enzyme called poly-A polymerase then adds a string of approximately 200 A residues, called the poly-A tail. This modification further protects the pre-mRNA from degradation and signals the export of the cellular factors that the transcript needs to the cytoplasm.
Eukaryotic genes are composed of exons, which correspond to protein-coding sequences (ex-on signifies that they are expressed), and (int)ervening sequences called introns (int-ron denotes their intervening role), which may be involved in gene regulation but are removed from the pre-mRNA during processing. Intron sequences in mRNA do not encode functional proteins.
The discovery of introns came as a surprise to researchers in the 1970s, who expected that pre-mRNAs would specify protein sequences without further processing, as they had observed in prokaryotes. The genes of higher eukaryotes very often contain one or more introns. These regions may correspond to regulatory sequences; however, the biological significance of having many introns or having very long introns in a gene is unclear. It is possible that introns slow down gene expression because it takes longer to transcribe pre-mRNAs with many introns. Alternatively, introns may be nonfunctional sequence remnants left over from the fusion of ancient genes throughout evolution. This is supported by the fact that separate exons often encode separate protein subunits or domains. For the most part, the sequences of introns can be mutated without ultimately affecting the protein product.
All of a pre-mRNA’s introns must be completely and precisely removed before protein synthesis. If the process errs by even a single nucleotide, the reading frame of the rejoined exons would shift, and the resulting protein would be dysfunctional. The process of removing introns and reconnecting exons is called splicing (Figure 15.14). Introns are removed and degraded, while the pre-mRNA is still in the nucleus. Splicing occurs by a sequence-specific mechanism that ensures that introns will be removed and exons rejoined with the accuracy and precision of a single nucleotide. The splicing of pre-mRNAs is conducted by complexes of proteins and RNA molecules called spliceosomes.
- Mutations in the spliceosome recognition sequence at each end of an intron, or in the proteins and RNAs that make up the spliceosome, may occur. Mutations may also add new spliceosome recognition sites.
- Mutations in the spliceosome recognition sequence at each end of an exon, or in the proteins and RNAs that make up the spliceosome, may occur. Mutations may also add new spliceosome recognition sites.
- Mutations in the spliceosome recognition sequence at each end of an intron, or in the proteins and RNAs that make up the spliceosome, may occur. Mutations may also delete existing spliceosome recognition sites.
- Mutations at the each end of intron and exon, or in the proteins and RNAs that make up the spliceosome, may occur. Mutations may also add new spliceosome recognition sites and delete existing sites.
Note that more than 70 individual introns can be present, and each has to undergo the process of splicing—in addition to 5' capping and the addition of a poly-A tail—just to generate a single, translatable mRNA molecule.
Link to Learning
Learn how introns are removed during RNA splicing at the DNA Learning Center.
Explain why helper proteins are necessary for the formation of the final protein during RNA splicing in higher organisms.
- Helper proteins attach themselves to the ends of introns so that they can be spliced out during RNA splicing, and coded areas are spliced together to form mRNA, which then codes for the final protein.
- Helper proteins attach themselves to the ends of exons so that they can be spliced out during RNA splicing, and coded areas are spliced together to form mRNA, which encodes the final protein.
- Helper proteins attach themselves to mRNA in order to remove the non-coded areas and thus form the pre-mRNA, which codes for the final protein.
- Helper proteins help the pre-mRNA to recruit various other components, which splice out the non-coded regions and form mRNA that codes for the final protein.
Processing of tRNAs and rRNAs
Processing of tRNAs and rRNAs
The tRNAs and rRNAs are structural molecules that have roles in protein synthesis; however, these RNAs are not themselves translated. Pre-rRNAs are transcribed, processed, and assembled into ribosomes in the nucleolus. Pre-tRNAs are transcribed and processed in the nucleus and then released into the cytoplasm where they are linked to free amino acids for protein synthesis.
Most of the tRNAs and rRNAs in eukaryotes and prokaryotes are first transcribed as a long precursor molecule that spans multiple rRNAs or tRNAs. Enzymes then cleave the precursors into subunits corresponding to each structural RNA. Some of the bases of pre-rRNAs are methylated; that is, a –CH3 moiety (methyl functional group) is added for stability. Pre-tRNA molecules also undergo methylation. As with pre-mRNAs, subunit excision occurs in eukaryotic pre-RNAs destined to become tRNAs or rRNAs.
Mature rRNAs make up approximately 50 percent of each ribosome. Some of a ribosome’s RNA molecules are purely structural, whereas others have catalytic or binding activities. Mature tRNAs take on a three-dimensional structure through intramolecular hydrogen bonding to position the amino acid binding site at one end and the anticodon at the other end (Figure 15.15). The anticodon is a three-nucleotide sequence in a tRNA that interacts with an mRNA codon through complementary base pairing.
This section may include links to websites that contain links to articles on unrelated topics. See the preface for more information.