Introduction
Introduction
Once you have a set of data, you will need to organize it so that you can analyze how frequently each datum occurs in the set. However, when calculating the frequency, you may need to round your answers so that they are as precise as possible.
Answers and Rounding Off
Answers and Rounding Off
A simple way to round off answers is to carry your final answer one more decimal place than was present in the original data. Round off only the final answer. Do not round off any intermediate results, if possible. If it becomes necessary to round off intermediate results, carry them to at least twice as many decimal places as the final answer. Expect that some of your answers will vary from the text due to rounding errors.
It is not necessary to reduce most fractions in this course. Especially in Probability Topics, the chapter on probability, it is more helpful to leave an answer as an unreduced fraction.
Levels of Measurement
Levels of Measurement
The way a set of data is measured is called its level of measurement. Correct statistical procedures depend on a researcher being familiar with levels of measurement. Not every statistical operation can be used with every set of data. Data can be classified into four levels of measurement. They are as follows (from lowest to highest level):
 Nominal scale level
 Ordinal scale level
 Interval scale level
 Ratio scale level
Data that is measured using a nominal scale is qualitative (categorical). Categories, colors, names, labels, and favorite foods along with yes or no responses are examples of nominal level data. Nominal scale data are not ordered. For example, trying to classify people according to their favorite food does not make any sense. Putting pizza first and sushi second is not meaningful.
Smartphone companies are another example of nominal scale data. The data are the names of the companies that make smartphones, but there is no agreed upon order of these brands, even though people may have personal preferences. Nominal scale data cannot be used in calculations.
Data that is measured using an ordinal scale is similar to nominal scale data but there is a big difference. The ordinal scale data can be ordered. An example of ordinal scale data is a list of the top five national parks in the United States. The top five national parks in the United States can be ranked from one to five but we cannot measure differences between the data.
Another example of using the ordinal scale is a cruise survey where the responses to questions about the cruise are excellent, good, satisfactory, and unsatisfactory. These responses are ordered from the most desired response to the least desired. But the differences between two pieces of data cannot be measured. Like the nominal scale data, ordinal scale data cannot be used in calculations.
Data that is measured using the interval scale is similar to ordinal level data because it has a definite ordering but there is a difference between data. The differences between interval scale data can be measured though the data does not have a starting point.
Temperature scales like Celsius (C) and Fahrenheit (F) are measured by using the interval scale. In both temperature measurements, 40° is equal to 100° minus 60°. Differences make sense. But 0 degrees does not because, in both scales, 0 is not the absolute lowest temperature. Temperatures like –10 °F and –15 °C exist and are colder than 0.
Interval level data can be used in calculations, but one type of comparison cannot be done. 80 °C is not four times as hot as 20 °C (nor is 80 °F four times as hot as 20 °F). There is no meaning to the ratio of 80 to 20 (or four to one).
Data that is measured using the ratio scale takes care of the ratio problem and gives you the most information. Ratio scale data is like interval scale data, but it has a 0 point and ratios can be calculated. For example, four multiple choice statistics final exam scores are 80, 68, 20 and 92 (out of a possible 100 points). The exams are machinegraded.
The data can be put in order from lowest to highest 20, 68, 80, 92.
The differences between the data have meaning. The score 92 is more than the score 68 by 24 points. Ratios can be calculated. The smallest score is 0. So 80 is four times 20. The score of 80 is four times better than the score of 20.
Frequency
Frequency
Twenty students were asked how many hours they worked per day. Their responses, in hours, are as follows:
5, 6, 3, 3, 2, 4, 7, 5, 2, 3, 5, 6, 5, 4, 4, 3, 5, 2, 5, 3.
Table 1.12 lists the different data values in ascending order and their frequencies.
DATA VALUE  FREQUENCY 

2  3 
3  5 
4  3 
5  6 
6  2 
7  1 
A frequency is the number of times a value of the data occurs. According to Table 1.12, there are three students who work two hours, five students who work three hours, and so on. The sum of the values in the frequency column, 20, represents the total number of students included in the sample.
A relative frequency is the ratio (fraction or proportion) of the number of times a value of the data occurs in the set of all outcomes to the total number of outcomes. To find the relative frequencies, divide each frequency by the total number of students in the sample—in this case, 20. Relative frequencies can be written as fractions, percents, or decimals.
DATA VALUE  FREQUENCY  RELATIVE FREQUENCY 

2  3  $\frac{3}{20}$ or .15 
3  5  $\frac{5}{20}$ or .25 
4  3  $\frac{3}{20}$ or .15 
5  6  $\frac{6}{20}$ or .30 
6  2  $\frac{2}{20}$ or .10 
7  1  $\frac{1}{20}$ or .05 
The sum of the values in the relative frequency column of Table 1.13 is $\frac{20}{20}$ , or 1.
Cumulative relative frequency is the accumulation of the previous relative frequencies. To find the cumulative relative frequencies, add all the previous relative frequencies to the relative frequency for the current row, as shown in Table 1.14.
In the first row, the cumulative frequency is simply .15 because it is the only one. In the second row, the relative frequency was .25, so adding that to .15, we get a relative frequency of .40. Continue adding the relative frequencies in each row to get the rest of the column.
DATA VALUE  FREQUENCY  RELATIVE
FREQUENCY

CUMULATIVE RELATIVE
FREQUENCY


2  3  $\frac{3}{20}$ or .15  .15 
3  5  $\frac{5}{20}$ or .25  .15 + .25 = .40 
4  3  $\frac{3}{20}$ or .15  .40 + .15 = .55 
5  6  $\frac{6}{20}$ or .30  .55 + .30 = .85 
6  2  $\frac{2}{20}$ or .10  .85 + .10 = .95 
7  1  $\frac{1}{20}$ or .05  .95 + .05 = 1.00 
The last entry of the cumulative relative frequency column is one, indicating that one hundred percent of the data has been accumulated.
NOTE
Because of rounding, the relative frequency column may not always sum to one, and the last entry in the cumulative relative frequency column may not be one. However, they each should be close to one.
Table 1.15 represents the heights, in inches, of a sample of 100 male semiprofessional soccer players.
HEIGHTS
(INCHES)

FREQUENCY  RELATIVE
FREQUENCY

CUMULATIVE
RELATIVE
FREQUENCY


59.95–61.95  5  $\frac{5}{100}$ = .05  .05 
61.95–63.95  3  $\frac{3}{100}$ = .03  .05 + .03 = .08 
63.95–65.95  15  $\frac{15}{100}$ = .15  .08 + .15 = .23 
65.95–67.95  40  $\frac{40}{100}$ = .40  .23 + .40 = .63 
67.95–69.95  17  $\frac{17}{100}$ = .17  .63 + .17 = .80 
69.95–71.95  12  $\frac{12}{100}$ = .12  .80 + .12 = .92 
71.95–73.95  7  $\frac{7}{100}$ = .07  .92 + .07 = .99 
73.95–75.95  1  $\frac{1}{100}$ = .01  .99 + .01 = 1.00 
Total = 100  Total = 1.00 
The data in this table have been grouped into the following intervals:
 59.95–61.95 inches
 61.95–63.95 inches
 63.95–65.95 inches
 65.95–67.95 inches
 67.95–69.95 inches
 69.95–71.95 inches
 71.95–73.95 inches
 73.95–75.95 inches
Note
This example is used again in Descriptive Statistics, where the method used to compute the intervals will be explained.
In this sample, there are five players whose heights fall within the interval 59.95–61.95 inches, three players whose heights fall within the interval 61.95–63.95 inches, 15 players whose heights fall within the interval 63.95–65.95 inches, 40 players whose heights fall within the interval 65.95–67.95 inches, 17 players whose heights fall within the interval 67.95–69.95 inches, 12 players whose heights fall within the interval 69.95–71.95, seven players whose heights fall within the interval 71.95–73.95, and one player whose heights fall within the interval 73.95–75.95. All heights fall between the endpoints of an interval and not at the endpoints.
Example 1.15
From Table 1.15, find the percentage of heights that are less than 65.95 inches.
If you look at the first, second, and third rows, the heights are all less than 65.95 inches. There are 5 + 3 + 15 = 23 players whose heights are less than 65.95 inches. The percentage of heights less than 65.95 inches is then $\frac{23}{100}$ or 23 percent. This percentage is the cumulative relative frequency entry in the third row.
Table 1.16 shows the amount, in inches, of annual rainfall in a sample of towns.
Rainfall (Inches)  Frequency  Relative Frequency  Cumulative Relative Frequency 

2.95–4.97  6  $\frac{6}{50}$ = .12  .12 
4.97–6.99  7  $\frac{7}{50}$ = .14  .12 + .14 = .26 
6.99–9.01  15  $\frac{15}{50}$ = .30  .26 + .30 = .56 
9.01–11.03  8  $\frac{8}{50}$ = .16  .56 + .16 = .72 
11.03–13.05  9  $\frac{9}{50}$ = .18  .72 + .18 = .90 
13.05–15.07  5  $\frac{5}{50}$ = .10  .90 + .10 = 1.00 
Total = 50  Total = 1.00 
From Table 1.16, find the percentage of rainfall that is less than 9.01 inches.
Example 1.16
From Table 1.15, find the percentage of heights that fall between 61.95 and 65.95 inches.
Add the relative frequencies in the second and third rows: .03 + .15 = .18 or 18 percent.
From Table 1.16, find the percentage of rainfall that is between 6.99 and 13.05 inches.
Example 1.17
Use the heights of the 100 male semiprofessional soccer players in Table 1.15. Fill in the blanks and check your answers.
 The percentage of heights that are from 67.95–71.95 inches is ________.
 The percentage of heights that are from 67.95–73.95 inches is ________.
 The percentage of heights that are more than 65.95 inches is ________.
 The number of players in the sample who are between 61.95 and 71.95 inches tall is ________.
 What kind of data are the heights?
 Describe how you could gather this data (the heights) so that the data are characteristic of all male semiprofessional soccer players.
Remember, you count frequencies. To find the relative frequency, divide the frequency by the total number of data values. To find the cumulative relative frequency, add all of the previous relative frequencies to the relative frequency for the current row.
 29 percent
 36 percent
 77 percent
 87
 quantitative continuous
 get rosters from each team and choose a simple random sample from each
From Table 1.16, find the number of towns that have rainfall between 2.95 and 9.01 inches.
Collaborative Exercise
In your class, have someone conduct a survey of the number of siblings (brothers and sisters) each student has. Create a frequency table. Add to it a relative frequency column and a cumulative relative frequency column. Answer the following questions:
 What percentage of the students in your class have no siblings?
 What percentage of the students have from one to three siblings?
 What percentage of the students have fewer than three siblings?
Example 1.18
Nineteen people were asked how many miles, to the nearest mile, they commute to work each day. The data are as follows:
2, 5, 7, 3, 2, 10, 18, 15, 20, 7, 10, 18, 5, 12, 13, 12, 4, 5, 10. Table 1.17 was produced.
DATA  FREQUENCY  RELATIVE
FREQUENCY

CUMULATIVE
RELATIVE
FREQUENCY


3  3  $\frac{3}{19}$  .1579 
4  1  $\frac{1}{19}$  .2105 
5  3  $\frac{3}{19}$  .1579 
7  2  $\frac{2}{19}$  .2632 
10  3  $\frac{4}{19}$  .4737 
12  2  $\frac{2}{19}$  .7895 
13  1  $\frac{1}{19}$  .8421 
15  1  $\frac{1}{19}$  .8948 
18  1  $\frac{1}{19}$  .9474 
20  1  $\frac{1}{19}$  1.0000 
 Is the table correct? If it is not correct, what is wrong?
 True or False: Three percent of the people surveyed commute three miles. If the statement is not correct, what should it be? If the table is incorrect, make the corrections.
 What fraction of the people surveyed commute five or seven miles?
 What fraction of the people surveyed commute 12 miles or more? Less than 12 miles? Between five and 13 miles (not including five and 13 miles)?
 No. The frequency column sums to 18, not 19. Not all cumulative relative frequencies are correct.
 False. The frequency for three miles should be one; for two miles (left out), two. The cumulative relative frequency column should read 1052, 01579, 02105, 03684, 04737, 06316, 07368, 07895, 08421, 09474, 1.0000.
 $\frac{5}{19}$
 $\frac{7}{19}$, $\frac{12}{19}$, $\frac{7}{19}$
Table 1.16 represents the amount, in inches, of annual rainfall in a sample of towns. What fraction of towns surveyed get between 11.03 and 13.05 inches of rainfall each year?
Example 1.19
Table 1.18 contains the total number of deaths worldwide as a result of earthquakes for the period from 2000 to 2012.
Year  Total Number of Deaths 

2000  231 
2001  21,357 
2002  11,685 
2003  33,819 
2004  228,802 
2005  88,003 
2006  6,605 
2007  712 
2008  88,011 
2009  1,790 
2010  320,120 
2011  21,953 
2012  768 
Total  823,856 
Answer the following questions:
 What is the frequency of deaths measured from 2006 through 2009?
 What percentage of deaths occurred after 2009?
 What is the relative frequency of deaths that occurred in 2003 or earlier?
 What is the percentage of deaths that occurred in 2004?
 What kind of data are the numbers of deaths?
 The Richter scale is used to quantify the energy produced by an earthquake. Examples of Richter scale numbers are 2.3, 4.0, 6.1, and 7.0. What kind of data are these numbers?
 97,118 (11.8 percent)
 41.6 percent
 67,092/823,356 or 0.081 or 8.1 percent
 27.8 percent
 quantitative discrete
 quantitative continuous
Table 1.19 contains the total number of fatal motor vehicle traffic crashes in the United States for the period from 1994–2011.
Year  Total Number of Crashes  Year  Total Number of Crashes 

1994  36,254  2004  38,444 
1995  37,241  2005  39,252 
1996  37,494  2006  38,648 
1997  37,324  2007  37,435 
1998  37,107  2008  34,172 
1999  37,140  2009  30,862 
2000  37,526  2010  30,296 
2001  37,862  2011  29,757 
2002  38,491  Total  653,782 
2003  38,477 
Answer the following questions:
 What is the frequency of deaths measured from 2000 through 2004?
 What percentage of deaths occurred after 2006?
 What is the relative frequency of deaths that occurred in 2000 or before?
 What is the percentage of deaths that occurred in 2011?
 What is the cumulative relative frequency for 2006? Explain what this number tells you about the data.